5 Radio Transmission Mistakes That Could Cost Lives

Your Radio Is Not Optional Equipment

Every piece of gear in your turnouts serves a purpose. Your SCBA keeps you breathing. Your gloves protect your hands. Your radio keeps you alive.

On the fireground, radio communication is the nervous system of the entire operation. It's how the IC knows what's happening inside. It's how you call for help when things go sideways. It's how PAR is taken, benchmarks are communicated, and the evacuation signal reaches every crew in the building.

And yet, radio communication is one of the most under-trained skills in the fire service. We spend hundreds of hours on hose evolutions and ladder raises, but how much time does the average department spend on radio discipline? Not enough.

Here are five radio mistakes that are still happening on firegrounds across the country , and how to fix them.

Mistake #1: Keying Up Without a Plan

You've heard it. Someone keys the mic, and what comes out is: "Uh... Command from... uh... Engine 7, we've got... um... fire on the second floor and we're... uh..."

Every "uh" and "um" is dead air. Dead air on a fireground radio channel is wasted bandwidth , and on a busy incident, bandwidth is life.

The fix: Before you key the mic, know exactly what you're going to say. Use the "Think, Key, Speak" method:
Think , mentally compose your message
Key , press the transmit button, wait a beat
Speak , deliver the message clearly and concisely

The best radio operators on the fireground sound calm, organized, and deliberate. That's not because they're not stressed. It's because they've practiced enough that the structure is automatic.

Mistake #2: Not Using Standard Formats

The fire service has standardized communication formats for a reason , they ensure critical information gets transmitted in a predictable order so nothing gets missed. But too many firefighters wing it.

Here are the formats you need to know cold:

CAN Report (Conditions, Actions, Needs)
Used for progress reports and status updates:
Conditions , what you're seeing (fire conditions, smoke, heat, victim status)
Actions , what you're doing right now
Needs , what you need from Command (resources, water, ventilation, relief)

Example: "Command from Engine 3, Division 2. We have heavy fire involvement in two bedrooms on the Bravo side. We're advancing a line down the hallway. We need a second line to back us up and ventilation on this floor."

LUNAR (Location, Unit, Name, Assignment, Resources)
Used for Mayday transmissions:
Location , where you are in the building (floor, quadrant, room)
Unit , your company designation
Name , your name (yes, your actual name)
Assignment , what you were doing when things went wrong
Resources , what you need (air, rescue, hose line)

Example: "Mayday, Mayday, Mayday. Firefighter down, second floor, Division Charlie. Engine 5. Williams. I was advancing the attack line and the floor collapsed. I'm in the basement, I have about five minutes of air, I need immediate rescue."

Benchmarks
Standard progress markers that tell Command where the incident stands:
"All clear" , primary search complete, no victims found (or all victims removed)
"Under control" , fire is knocked down, no extension
"Loss stopped" , overhaul complete, no further damage expected

These aren't suggestions. They're the language of the fireground, and everybody on the channel needs to speak it the same way.

Mistake #3: Stepping on Other Transmissions

This one drives incident commanders crazy. Two people transmit at the same time, and neither message gets through. On an analog radio system, simultaneous transmissions produce that awful squealing sound and nobody hears anything.

The fix:
Listen before you transmit. If someone else is talking, wait.
If your message isn't urgent, hold it. Let priority traffic clear first.
If you get stepped on, wait and re-transmit. Don't just keep keying up and hoping.
Use "emergency traffic" to clear the channel when you have a critical message.

Per NFPA 1561 (Standard on Emergency Services Incident Management System), radio discipline is a command responsibility. But it starts with individual discipline at the company level.

Mistake #4: Giving Too Much or Too Little Information

There are two extremes, and both are dangerous:

Too much: "Command, this is Engine 7, we're on the second floor of the building, we came up the interior stairway on the Alpha side, we found a bedroom on the left side of the hallway, there's moderate smoke in here, the door was closed when we got here, we opened it, we're going in to search, we've got about 3,200 PSI, the thermal imager is showing some heat on the ceiling near the wall by the window on the Bravo side..."

Nobody is processing all of that in real time. The IC needs the critical facts, not a novel.

Too little: "Command, Engine 7. We're in. It's smoky."

That tells Command almost nothing useful. Where are you? What are you doing? What do you need?

The fix: Stick to the CAN format. Give Command what they need to make decisions: your location, what you're seeing, what you're doing, and what you need. Three to four sentences, max.

Mistake #5: Failing to Practice Under Stress

Here's the uncomfortable truth: the firefighters who make these mistakes on the fireground aren't bad firefighters. They're untrained communicators. They know the formats. They've read the SOPs. But they've never practiced radio transmissions under stress.

When your heart rate spikes, your fine motor skills degrade, your cognitive processing slows, and your speech patterns change. This is basic stress physiology, and it affects everyone. The difference between the firefighter who gives a clear Mayday and the one who freezes on the mic is practice.

The fix:
Practice radio transmissions during every drill. Don't skip the comms component.
Use scenario-based training that requires you to actually speak your transmissions, not just think about them.
Record yourself and listen back. You'll catch habits you didn't know you had.
Train on voice-evaluated platforms like StruckBox's Radio Drill Trainer and Size-Up Trainer, where AI evaluates your transmission for clarity, completeness, and format adherence.

The Standard You Walk Past Is the Standard You Accept

Radio discipline isn't glamorous. It's not the skill that gets posted on Instagram. But it's the skill that saves lives when everything else is going wrong.

Every firefighter on your crew should be able to give a clear CAN report, transmit a LUNAR Mayday, and communicate benchmarks without hesitation. If they can't, that's a training gap , and it needs to get fixed before the next working fire.

Want to sharpen your radio skills? StruckBox radio drills offers voice-evaluated radio drills covering Mayday, CAN reports, size-ups, and benchmarks. Real scenarios. AI feedback. No excuses.

Learn more about fireground communications from the USFA. Practice your radio transmissions with StruckBox radio drills.